Playing Back A Tape - Sony HANDYCAM DCR-TRV330 Operating Instructions Manual

Playing back a tape
28
Press DISPLAY on vour camcorder or the Remote Commander supplied with your
canlcorder.
The indicators appear on the screen.
To make the indicators disappear, press DISPLAY again.
DISPLAY
Using the data code function
Your canrcorder autonratically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code). Use the
Remote Commander for this operation.
Press DATA CODE on the Remote Commander in the playback mode.
The display changes as follows:
date/time --_ various settings (SteadyShot, exposure AUTO/MANUAL, white balance,
gain, shutter speed, aperture value) --_ no indicator
Date/time
' _40rm l_ s_ 0002301
[a] SteadyShot off indicator
[b] Exposure mode indicator
[el White balance indicator
[d] Gain indicator
[el Shutter speed indicator
If] Aperture value
Various settings
t _ 40min 1_ sp OOL}23bt]
/
[a]
[b]
[c]
[d]
[e]
, [f]
Not to display various settings
Set DATA CODE to DATE in the menu settings (p. 79).
The display changes as follows:
date/time --_ no indicator
Notes on the data code function
• The data code function works only for tapes recorded in the Digital81} system.
• Various settings of the recording data are not recorded when recording images on
"Memory Stick" (DCR-TRV330/TRV530 only).