Sony SLV-751HF Operating Instructions Manual page 55

General S etupInformation
m
Why this setting Is necessary: -...
You must set the RF UNIT selector at the rear of the VCR
properly so that your TV can receive the coFrect signal from
the VCR. Set the selector to CH 3 (channel 3) or
CH 4 (channel 4), whichever is not active in your area.
If you connect a TV or color monitor.equipped with AN input
jacks, skip this step.
Set the RF UNIT at the rear of the VCR to CH 3 or
CH 4, whichever is not active In your area.
2
Press POWER.
The power indicator lights up on the VCR.
3
Press TVNTR.
The VTR indicator lights up in the display window.
4
Select an active channel in your area by pressing
CHANNEL +/-.
o
5 Turn on your TV and set it to the channel you selected
in step 1.
Your TV is now tuned to the VCR. Whenever you use the
VCR, set the TV to the preselected channel.
NOTE:
For details on adjusting TV channels, see your TV
instruction manual.
Additional Information 55