Sony SLV-751HF Operating Instructions Manual page 15

_o_'tktS']!'l 9
1
Set the RF UNIT on the VCR's rear panel to
OH 3 or OH 4.
If you made A/V connections, skip this step.
!i_lf both are used, pick either channel. ....
..... ,_ _:_ _._
_a Is are on page S5. _
._:_
2
Set NORMAL/CAW to NORM.
Press MENU.
HENU
• TIHER SET/CHECK
SET UP MENU
TUNER PRESET
_ET ¥CR Plus+ CHANNELS
CABLE BOX CONTROL
CLOCK SET
Details are on pages 19 and 20.
Select TUNER PRESET.
MENU
TIHER SETICHECK
SET UP HENU
• TUNER PRESET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CLOCK SET
$
Set to NORM.
I TUNER PRESET
• HORNAL/CATV ONORH CATV
AUTO PRESET
MANUAL SET OAUD ERASE
AFT OON OFF
FENE TUNING
3
Preprogram the channels into the VCR.
Press MENU.
MENU
• TIHER SET/CHECK
SET UP MENU
TUNER PRESET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CLOCK SET
SelectTUNER PRESET.
MENU
TIMER SET/CHECK
SET UP MENU
• TUNER PRESET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CLOCK SET
Select AUTO PRESET,
then press EXECUTE.
TUNER PRESET
NORNALfCATV ONORH CATV
• AUTO PRESET
MANUAL SET OADD ERASE
AFT OON OFF
FINE TUNING
Details are on pages 19 and 20.
2
Find the VCR Plus+ Channel Listing in your program
guide. For details, see page 42.
If the channels In the program guide are different from
the channels that you actually use on your TV, set the
channels that are different as follows:
Select SET VCR Plus+
Press MENU. CHANNELS.
MENU
• T]HER SET/CHECK
SET UP MENU
TUNER PRESET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CLOCK SET
NENU
T[HER SET/CHECK
SET UP MENU
TONER PRESET
• SET VCR Plus÷ CHANNELS
CABLE BOX CONTROL
CLOCK SET
Set the appropriateguide
channels and TV channels
for your area.
/,cR !
JPush HENU to quit J J
Detailsare on page 43. Youractual TV channel
I
To Watch the "IV
1 Turn your VCR off, or press the VCR's TV/VTR button
until the VTR indicator in the display window goes off.
2 Tune the "IV normally.
To Watch the VCR
1 Tune the TV to CH 3 or CH 4, whichever you set on the
back of the VCR. (If you made the AN connections on
page 7, set your TV to the AiV input instead.)
2 Insert a cassette and press I_ PLAY. If there's no
picture on your TV, press the VCR's TVNTR button until
the VTR indicator comes on in the VCR's display
window.
Details are on page 28.
To Record A Program
1 Press VCR Plus+ on the Remote Commander.
2 Enter the program's PlusCode number.
3 Press ONCE, DAILY, or WEEKLY on the Remote
Commander.
4 Insert a blank casette.
5 Press TIMER REC on the Remote Commander.
Details are on page 44.
Preparation 1 5
:z:
o
o
€
_t
-!