Sony SLV-751HF Operating Instructions Manual page 29

To delete or call up the Display on the TV screen, press
DISPLAY on the Remote Commander.
Before recording or playback, press COUNTER HESET on
the Remote Commander to reset the counter to zero. By
noting the setting, you can find that point later by referring to
the counter. Use the label on the cassette to list the
programs and their counter readings.
"D
110/15 FRI 11:00AM_ate 8rid time
] near time counter
•
To turn off the Display, press DISPLAY.
NOTES"
• The remaining tape length displayed is approximate.
Therefore, use it only as an approximate reference.
• When you insert a cassette with a short tape length
such as T-20, T-30 or a non-standard commercially
available cassette, this indicator may not function
correctly.
• The on-screen Display cannot be displayed on the
screen during still mode, or slow motion playback.
• Audio output, tape operation mode, and tape speed
are displayed when you make changes to them.
They are displayed even when the Display is turned off.
NOTES ON COUNTER READING:
,, After a cassette is ejected, the counter reading is
retained. When a cassette is reinserted the counter
returns to "0H00M00S."
• The counter will not advance on portions of the tape
on which no recording has been made.
Basic Operations
29