Sony SLV-751HF Operating Instructions Manual page 11

Set the RF UNIT on the VCR's rear panel to CH 3 or
CH 4.
If you made AN connections, skip this step.
are on page 55.
2
Set CABLE BOX CONTROL to OFF.
3
Set NORMAL/CAW to CATV.
PressMENU.
MENU
• TIMER SET/CHECK
SET UP MENU
TUNER PRESET
GET VCR Plus+ CHARNELS
CABLE BOX CONTROL
CLOCK SET
Detailsare on pages 19 and 20.
SelectTUNER PRESET.
I_l MENU
TIMER SET/CHECK
SET UP MENU
• TUNER PRESET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CLOCK SET
€
Set to CATV.
• NORNAL/CATV NORM
AUTO PRESET
MANUAL SET OAO0
AFT iON
FINE TUNING
4
Preprogram the channels Into the VCR.
PressMENU.
.ENu ............... 11"4
•TIMER SE.CNECK
SET UP MENU
TUNER PRESET
SET VCR Plus÷ CHARNELS
CABLE BOX CONTROL
CLOCK SET
Details are on pages 19 and 20.
SelectTUNER PRESET.
MENU
TIMER SET/CHECK
SET UP MENU
• TUNER PRESET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CLOCK SET
SelectAUTO PRESET,
then pressEXECUTE.
TUNER PRESET 1OFF 1
RORMAL/CATV NORM _ATV
• AUTO PRESET
MANUAL SET OAUD
ERASE
AFT DON
FINE TUNING
1
2
Find the VCR Plus+ Channel Listing in your program
guide. For details,see page 42.
If the channels in the program guide are different
from the channels that you actually use on your
TV, set the channels that are different as follows:
Select SET VCR Plus+
Press MENU. CHANNELS.
MENU
• TIMER SET/CHECK
SET UP MENU
TUNER PRESET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CLOCK SET
MENU
TIMER SETtCHECK
SET UP MENU
TUNER PRESET
• SET VCR Plus_ CHANNELS
CABLE BOX CONTROL
CLOCK SET
Programlisting guidechannel--
Detailsare on page 43.
€
Enter the program guide channel,
thenthe channel your VCR uses.
QUIOE TV
II
GUIDE TV
2 - 73 59
-
5- 4
/
17- 55 86 -
28- g
43 -118
l Push MENU to
qult
Your actual cable channel --
I i
To Watch TV
1 Turn your VCR off, or press the VCR's TVNTR button
until the VTR indicator in the display window goes off.
2 Select the channel with your cable box (if you have one),
or directly tune with your TV (if you don't).
To Watch the VCR
la If you didn't use the A/V input:
• Turn on the cable box.
• Select CH 3 or CH 4 on the cable box (whichever
you set on the back of the VCR).
• Select the output channel of the cable box
(usually 2, 3 or 4) on your TV.
lb If you made the A/V connections on page 7:
Set your TV to the A/V input.
2 Insert a cassette and press I_ PLAY.
Details are on page 28.
To Record A Program
I Press VCR Plus+ on the Remote Commander.
2 Enter the program's PlusCode number.
3 Press ONCE, DAILY, or WEEKLY on the Remote
Commander.
4 Insert a blank cassette.
5 Press TIMER REC on the Remote Commander.
Details are on page 44.
O
o
,mL
=},=
Preparation 1 1