Sony SLV-751HF Operating Instructions Manual page 20

PresettingtheActive Channels
5 Press • or • to select
NORM or CATV.
NORM presets the VHF and
UHF channels; CATV presets
your cable TV channels. The
lowest channel number, 2 for
NORM and 1 for CATV, will
appear on the screen.
6
Press • or v to move the
cursor to AUTO PRESET.
TUNER PRESET
,NORMAL/CATVONORM CATV
AUTO PRESET
MANUAL SET OADD ERASE
AFT OON OFF
FINE TUNING
TUNER PRESET m
NORMAL/CATVONORM CATV
,AUTO PRESET
MANUAL SET OADD ERASE
AFT OON OFF
FINE TUNING
7
Press EXECUTE
Receivable channels are preset in numerical
sequence.When no more channelscan be found, the
presettingstopsand the pictureof the lowest
numberedchannelisdisplayedon the tape counter.
The message "Please wait"is flashing whilepresetting
on the TV screen.
NOTE:
The VCR automatically exits from the TUNER PRESET
menu if you don't proceed for more than one minute.
After auto_Hatic presetting, you carl disable and/or add channels.
1 Follow steps I to 3 in "Presetting All Receivable
Channels Automatically" on page 19.
2
To disable channels, press CH +!- to select the
channel.
To add channels, press channel number buttons (0 to
9) and ENTER key to select the channel.
3
To disable channels, press • or • to select ERASE.
To add channels, press • or • to select ADD.
4
Press EXECUTE.
When you press CH +/-, the disabled channels are
removed and the added channels are displayed.
0 Preparation