Sony SLV-751HF Operating Instructions Manual page 36

Timer Recording
4
5
6
7
Press •.
Make sure that today's date is
flashing. If it isn't, reset the
clock to the correct time. See
"Setting the Time and Date"
(page 17).
Press • to set the month and
date to "7/10 SAT."
The day of the week is
TIMER SET/CHECK 7/ 4SUN
,_, START STOP CH
_7/ 4S]:_I-:-- -: .... SP
!}_U"
automatically set.
-/-- -:-- -: ....
-/-- -:-- -: ....
-/=- -:-- -: ....
°/-- -1-- -: ....
-1-- -:-- -: ....
-/-- -:-= -: ....
TIMER SET/CHECK 7/ 4SUN
,Q_,____ START STOP CH
;Zm}tT:
-, ....sP
-/-- -:-" "I ....
./.. -:-- -: ....
-1-- -:-- "i ....
./-- -1-- -: ....
./--
-:-- -:
....
Press • to flash the hours
position under "START,"
then i or • until "9:-- PM"
appears.
Press • to flash the minutes
position under "START,"
then i or • until "00"
appears.
8 Press •.
9
The cursor blinks in the time
field under "STOP." Set the
time to finish recording,
referring to steps 6 and 7.
Press • to flash the "CH"
field, then press i or • until
"26" appears.
Only the channels set in the
VCR will appear. You can
also use the CHANNEL +/- or
channel number buttons.
When using a cable box, the
cable box channels
appear under the CH section.
TIMER SET/CHECK 71 4SUN
DATE ,_T_RJ,. STOP CH
7/IOSAT_9_--_ -: .... SP
_/__
_:__u
-:--
-/.÷ -:-- -: ....
-/-- -:-- -: ....
-i-. -:-- -: ....
./-- -:-- -: ....
TIMER SET/CHECK 71 4SUN
DATE ST_T STOP CH
7/IOSAT 9.-J)(_PM -: .... SP
./.- -:-. -: ....
--n-
./.. -:-- -: ....
./.. -:=- -: ....
-/-- -:-- -: ....
-/-. -:-- -: ....
-/-- -:-- -: ....
TIMER SET/CHECK 7/ 4SUN
D)_TE START ST O,P CH
7/IOSAT 9:0OPM I0._i _- -- SP
-/-- -: ........
-/-- -: ........
-/-- -:-- -: ....
.I.- -:--
-: ....
-/.- -:-- -: ....
Press • to flash the
recording speed position,
then • or • or TAPE
T]MER SET/CHECK 7/ 4SUN
DATE START STOP CH
7/IOSAT 9:00PM I0:55PM 26-_
-/-- -:-- -: .....
-/-- -:-- -: .....
-/-- -:-- -: .....
-/-- -: .........
10
SPEED until "EP" appears.
To change or correct a
setting before entering it,
press < to return to the item
you wish to change.
TIMER SET/CHECK 71 4SUN
DATE START STOP CH
_7110SAT 9:00PM I0:55PM 26 EP
-/-- -:-- -: .....
-j-- -_-- -: .....
.1.- -:-. -: .....
.J-- -1.. -: .....
-1-- -:-- -: .....
Press • to store the
setting.
When all of the settings stop
flashing and display a "•" in
the leftmost column, you've
completed the setting.
To preset another program,
11
move the cursor to the next line and repeat steps 4 to 11.
12
Press EXECUTE.
The message "Please push TIMER REC to set timer"
appears on the TV screen.
13
TIMER SET/CHECK 7/ 4SUN
DATE START STOP
7/IOSAT g:OOPM IO:55PH-_-SP
./ .............
./.. .:.. -: .....
./-. -:.. -: .....
-/-- -:-- -: .....
-1-- -:-- -: .....
-I-- -:-- -:.....
Press TIMER REC (ON/OFF).
The VCR enters the timer recording standby mode and
the TIMER REC (recording) indicator lights up.
When using a cable box, make sure to leave it on.
To stop timer recording:
To stop timer recording while a program is being
recorded, press TIMER REC (ON/OFF).
NOTES:
To change or correct the setting before completing it,
press • to return to the item you wish to change.
• To record video sources from LINE IN 1 or 2 jacks,
press INPUT SELECT in step 4 to 11 to move the
screen cursor to LINE 1 or 2 in the "CH" position. This
cursor returns to channel number on the third press.
• When CABLE BOX CONTROL is set to "ON," timer
recording cannot be done through LINE IN.
• If you don't proceed for more than one minute, the
VCR automatically exits from the TIMER SET/CHECK
m nu
6 Basic Operations