Sony SLV-751HF Operating Instructions Manual page 30

Playback
lillillli_ I:_'I1.'tI__Jll_ / i_,,I¢_
When playing back a cassette recorded on another VCI4, the
tracking condition is automatically adjusted. You can also
adjust the tracking condition and the sharpness manually
according to the following instructions.
Manual tracking adjustment
When the playback picture has streaks and/or snow during
normal playback, adjust the picture manually with
TRACKING NORMAL/SLOW and STILL ADJUST v/&.
Press either • or • for the best possible picture. The tracking
meter will appear on the TV screen and the AUTO
TRACKING indicator will turn off.
ii ¸il;i_ i_i ;;i!ii,liiiiii_i !ii
Automatic tracking adjustment
The tracking condition is automatically adjusted on this VCR.
The AUTO TRACKING indicator flashes while the VCR is
searching for the optimal tracking condition and lights when
optimum playback picture is obtained. The automatic
tracking control is activated in the following conditions:
• When the cassette is inserted for the first time
• When the recording mode on the playback cassette is
switched from SP to EP and back again
• When the picture is distorted by scratches on the cassette
• When the AUTO TRACKING indicator is turned on by
pressing TRACKING AUTO/MANUAL after the picture is
adjusted manually
NOTES:
• Auto tracking adjustment is not possible for cassettes
recorded in LP mode.
• Auto tracking adjustment may be impossible and the
tracking indicator may not appear on the TV screen
when the recording condition of the cassette is poor.
• During auto tracking adjustment, streaks or noise
may occur.
You can play back cassettes on which stereo sound or
bilingual programs are recorded.
Press AUDIO MONITOR to select the desired sound mode.
Each press of the button changes the display on the "IV screen.
NOTE:
When you play back a cassette recorded in monaural,
the sound is heard in monaural regardless of the setting
of the AUDIO MONITOR.
Sound Mode
Stereo On-screen Sound heard
Indicator Stereo tal_e
Stereo
Display
Lights up STEREO
Lights up LcH Left channel
Lights up RcH Right channel
No None Monaural on normal
indication audio track
Bilingual tape
Left and right
channels
Left channel
Right channel
Sound on normal
audio track (SAP)
0 Basic Operations