Additional Safety Instructions For Lathes - Grizzly G2891 Instruction Manual

additional Safety Instructions for the G2891
1. before turning your lathe on, ensure
that the cutting tool is well away from
the turning square. ensure that the turn-
ing square will rotate freely.
2. make sure the workpiece and the tem-
plate or master spindle are securely
mounted.
3. always start the lathe at its slowest
speed.
4. maintain minimal play in the guide cable
and carriage.
5. to prevent excessive vibration, don't
force the cutting tool or take too big a
cut in one pass. recommended maxi-
⁄ "
mum cut is
1
16
6. make sure cable path is unobstructed at
all times.
Like all power tools, there is danger asso-
ciated with the model G2891 Lathe Copy
attachment. accidents
caused by lack of familiarity or failure to
pay attention to the tool or your work. use
this tool with respect and caution to lessen
the possibility of operator injury. If nor-
mal safety precautions are overlooked or
ignored serious personal injury may occur.
-4-
are frequently
7. before any copying operation, ensure
that the headstock and tailstock of your
lathe are centered on the same axis.
8. While working, position yourself so you
are within easy reach of all lathe and
Copy attachment controls.
9. Keep base lubricated to ensure smooth
carriage movement during copying. do
not lubricate the cable, it is friction
operated.
10. do not make any adjustments to the
lathe or copy attachment while the lathe
is operating. If adjustments are neces-
sary, turn the lathe off, unplug the power
cord and wait for the moving parts to
stop.
11. habits - good and bad - are hard to
break. develop good habits and safety
will become second-nature.
this equipment has the potential to pro-
pel debris into the air which can cause
eye injury. always wear safety glasses
or goggles when operating equipment.
everyday glasses or reading glasses only
have impact resistant lenses, they are not
safety glasses. be sure your safety glasses
meet american national Standards Institute
(anSI) standards.
no list of safety guidelines can be complete.
every shop environment is different. always
consider safety first, as it applies to your
individual working conditions. failure to do
so could result in serious personal injury,
damage to equipment or poor work results.
G2891 Lathe Copy Attachment