Closure; Machine Data 1 - Grizzly G2891 Instruction Manual

SeCtIon 7: CLoSure
The following pages contain general machine
data, parts diagrams/lists, troubleshooting guide
and Warranty/Return information for your Model
G2891 Lathe Copy Attachment.
If you need parts or help in assembling your
machine, or if you need operational informa-
tion, we encourage you to call our Service
Department. Our trained service technicians will
be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in Section
2 Introduction. The specifications, drawings, and
photographs illustrated in this manual represent
the Model G2891 as supplied when the manual
was prepared. however, due to Grizzly's policy
of continuous improvement, changes may be
made at any time with no obligation on the part
of Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, add the
new information to this manual and keep it for
reference.
We have included some important safety mea-
sures that are essential to this machine's opera-
tion. While most safety measures are generally
universal, Grizzly reminds you that each work-
shop is different and safety rules should be con-
sidered as they apply to your specific situation.
operating this equipment has the poten-
tial to propel debris into the air which can
cause eye injury. always wear safety glass-
es or goggles when operating equipment.
everyday glasses or reading glasses only
have impact resistant lenses, they are not
safety glasses. be certain the safety glass-
es you wear meet the appropriate stan-
dards of the american national Standards
Institute (anSI).
-18-
We recommend you keep a copy of our cur-
rent catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the Service
Department listed in Section 2: Introduction.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, woodworking magazines, and your local
library are good places to start.
The Model G2891 was specifically designed
for use with 40" Wood Lathes. do not
modIfy and/or uSe thIS maChIne for
any other purpoSe. modifications or
improper use of this tool will void the war-
ranty. If you are confused about any aspect
of this machine, do not use it until you have
answered all your questions. Serious per-
sonal injury may occur.
Like all power tools, there is danger associ-
ated with the model G2891 Copy attachment.
accidents are frequently caused by lack
of familiarity or failure to pay attention.
use this tool with respect and caution to
lessen the possibility of operator injury. If
normal safety precautions are overlooked
or ignored, serious personal injury may
occur.
G2891 Lathe Copy Attachment