Safety; Safety Rules For Power Tools; Safety Instructions For Power Tools - Grizzly G2891 Instruction Manual

for your own Safety read Instruction
manual before operating this equipment
the purpose of safety symbols is to attract your attention to possible hazardous conditions. this
manual uses a series of symbols and signal words which are intended to convey the level of
importance of the safety messages. the progression of symbols is described below. remember
that safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures.
notICe

Safety Instructions for power tools

1. Keep GuardS In pLaCe and in working
order.
2. remove adjuStInG
WrenCheS. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before turning on.
3. Keep WorK area CLean. Cluttered
areas and benches invite accidents.
4. don't uSe
envIronment. Don't use power tools in
damp or wet locations, or where any flam-
mable or noxious fumes may exist. Keep
work area well lighted.
-2-
SeCtIon 1: Safety
Indicates an imminently hazardous situation which, if not
avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, CouLd result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may also
be used to alert against unsafe practices.
this symbol is used to alert the user to useful information
about proper operation of the equipment.
KeyS and
In danGerouS
5. Keep ChILdren and vISItorS aWay.
All children and visitors should be kept a
safe distance from work area.
6. maKe WorK Shop ChILd proof with
padlocks, master switches, or by removing
starter keys.
7. don't forCe tooL. It will do the job
better and safer at the rate for which it was
designed.
8. uSe rIGht tooL. Don't force tool or
attachment to do a job for which it was not
designed.
G2891 Lathe Copy Attachment