Connecting Cable Tv - Samsung PN50A550S1FXZA User Manual

Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1 Ptug the incoming cable into the ANT IN terminal on the back of the TV.
_-- Because this TV is cable-ready, you do not need a cable box to view
unscrambled cable channels.
Connecting to a Cable Box that Descrambles All Channels
1 Find the cable that is connected to the ANT OUT terminal on your cable box.
_,_ This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
2 Connect the other end of this cable to the ANT IN terminal on the back of the TV.
ANT iN ANT OUT_
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below.
You will need a two=way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available
at most electronics stores.)
1 Find and disconnect the cabte that is
connected to the ANT IN terminal on your
cable box.
_-- This terminal might be tabeled "ANT
IN", "VHF IN" or simply, "IN".
2 Connect this cable to a two-way splitter.
Connect an Antenna cable between an
OUTPUT terminat on the splitter and the IN
terminal on the cable box.
Connect an Antenna cable between the
ANT OUT terminal on the cable box and the
B-IN terminal on the RF(A/B) switch.
Connect another cabte between the other
OUT terminal on the splitter and the A-IN
terminal on the RF (A/B) switch.
Connect the last Antenna cable between
the OUT terminal on the RF (A/B) switch
and the ANT IN terminal on the rear of the
TV.
-_£jlm- _... t A.T,.
Incoming
cabte
Splitter
Incoming
cable
Splitter _====
Incoming
cable
Splitter
RF (A/B)
Cable Box Switch
cable
Sp._te_ _"
k_ _ RF (A/B}
Cabte Box Switch
_,=_ _ _ _ TV Rear
cable Sphtter I_ RF (A/B)
Switch
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B"
position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)