Samsung PN50A550S1FXZA User Manual page 32

Reducing_ the Effects of Screen Burn
If screen burn has occurred, you can select a white screen or scrolling to help
remove screen burn artifacts.
1 Foitow the Activating Picture Options instructions numbers 1 and 2.
(Refer to page 27)
2 Press the A or _' button to select Screen Burn Protection, then press the
ENTER button.
Press the A or _' button to select Pixel Shift, All White, Scrolling, or Side
Gray then press the ENTER button.
Press the EXIT button to exit.
. All White
This function removes after-images on the screen by changing the color of
pixels to white. Use this function when there are remaining after-images or
symbols on the screen, especially when you displayed a still image on the
screen for a tong time.
, Scrolling
This function removes after-images on the screen by moving all the pixels on
the PDP according to a pattern. Use this function when there are remaining
after-images or symbols on the screen, especially when you displayed a still
image on the screen for a long time.
, Side Gray
When you watch TV with the screen ratio of 4:3, the screen is prevented
from any damage by adjusting the white balance on both extreme left and
right sides.
To prevent the screen burn from happening, select Dark or Light.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
• Light: When you set the screen ratio to 4-;3,it brightens the !eft and right
sides.
_-- To remove after-images on the screen, use either the All White or
Scrolling function. Although both functions remove after-images on the
screen, Scrolling is more effective.
_-- The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the
screen. If the after-image is not removed after performing the function,
repeat the function again.
Press any key on the remote control to cancel this feature.
Continued...