Samsung PN50A550S1FXZA User Manual page 31

Setting_the Film Mode
The TV can be set to automatically sense and process film signals from atl
sources and adjust the picture for optimum quality.
1 Follow the Activating Picture Options instructions numbers 1 and 2.
(Refer to page 27)
2 Press the A or _' button to select Film Mode, then press the ENTER button.
Press the A or _' button to select Off or Auto, then press the ENTER button.
Press the EXIT button to exit.
> Film mode is supported in TV, Video, S-Video, Component(480i / 1080i)
and HDMI(1080i).
Settingthe Blue Only Mode
This function is for AV device measurement experts. This function displays the
btue signal onty by removing the red and green signals from the video signal so
as to provide a Blue Filter effect that is used to adjust the Color and Tint of video
equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropri-
ate to the signal level of each video device using the Red/Green/Blue/Cyan/Ma-
genta/Yellow Color Bar Patterns, without using an additional Blue Filter.
1 Follow the Activating Picture Options instructions numbers 1 and 2.
(Refer to page 27)
2 Press the A or _' button to select Blue Only Mode, then press the ENTER
button.
Press the A or _' button to select Off or On, then press the ENTER button.
Press the EXIT button to exit.
Blue Only Mode is available when the picture mode is set to Movie or
Standard.