Connecting Cable Tv - Samsung PN50A400C2DXZA User Manual

4 series 400
Table of Contents

Advertisement

Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1
Plug the incoming cable into the ANT IN terminal on the back of the TV.
_" Because this TV is cable-ready, you do not need a cable box to view
unscrambled cable channels.
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is connected to the ANT OUT terminal on your cable box.
_" This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
2
Connect the other end of this cable to the ANT IN terminal on the back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below.
You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available
at most electronics stores.)
Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
This terminal might be labeled "ANT
IN", "VHF IN" or simply, "IN".
2
Connect this cable to a two-way splitter.
Connect an Antenna cable between an
OUTPUT terminal on the splitter and the IN
terminal on the cable box.
Connect an Antenna cable between the
ANT OUT terminal on the cable box and the
B-IN terminal on the RF(A/B) switch.
Connect another cable between the other
OUT terminal on the splitter and the A-IN
terminal on the RF (A/B) switch.
Connect the last Antenna cable between
the OUT terminal on the RF (A/B) switch
and the ANT IN terminal on the rear of the
TV.
Incoming
cable
Splitter
Incoming
cable
Splitter
Splitter
RF (A/B)
Cable
Box
Switch
Incoming
I
CABL
0
I
Sp,tter
L
_
R_ I)s)
Cable
Box
Switch
_
_/ili__
_
_
TV Rear
cable
Splitter
L.
_
RF (A/B)
Switch
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B"
position to view scrambled channels. (When you set the A/B switch to "B', you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn50a400Pn42a400c2dPn50a400c2d

Table of Contents