Storing(hanneJsin Memory (Autematk Methed)
First, select the correct signal source ("Air", "STD', "HRC" or "IRC') as
described on the previous page.
Press the MENU button.
Press the •
or •
button to select
"Channel",
then press the ENTER button.
Press the • or •
button to select "Auto
Program", then press the ENTER button.
Press the ENTER button to start the auto
program.
The TV begins memorizing all of the
available stations.
Press the ENTER button at any time to
interrupt the memorization process.
Press the EXIT button to exit.
Adding and [rasiag C haaads
You can add channels that were not memorized or delete unwanted channels
from memory.
Press the MENU button.
Press the •
or •
button to select
"Channel",
then press the ENTER button.
Press the • or •
button to select
"Add/Delete",
then press the ENTER
button.
Repeatedly pressing the ENTER button will
alternate between add channel and delete
channel.
Press the CHA
or CHv
button to switch
to the appropriate
channel, then repeat
above.
Press the EXIT button to exit.
Air 12
Not In Memory
AJtem_te_et_ed
Simply press the ADD/DEL button on the remote control to add or delete channels.
Enghsh - 27