nnect[ons
Connecting
VHF andUHF Antennas
If you do not hove a cable system, you will need to connect on antenna to your TV.
Antennas with 300-ohnl Flat Twin Leads
If your antenna looks like this:
it has 300-ohm flat twin leads.
Place the wires from the Iv/in
leads under the screws on the
300-75 ohm adaptor (not
supplied). Use a screwdriver
to tighten the screws.
i!ii_ ......
Plug the adopter into the
"ANT 1 IN" terminal on the
rear panel.
Antennas with 75-ohm Ronnd Leads
If your antenna looks like this:
it is an antenna with 75-ohm round leads.
Hug the antenna lead into the
"ANT 1 IN" terminal on the
rear panel.
glish - 14