Memorizing Thechannels - Samsung HL-P5085W Instruction Manual

erat[on
Memorizing theChannels
Your TV can memorize and store all of the available channels for both "off-air" (antenna) and
cable channels. After the available channels are memorized, use the CHA and CHv buttons to
scan through the channels. This eliminates the need to change channels by entering the channel
digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing
the channels (automatic) and adding/deleting channels (manual).
i_iiI
Nil
iiii; i
PMOD_ SMODE
VOL c_
PSIZ_ S'ilLL MTS SRS
(3_) (Z) (Z) C_D
REW STOP pLAy[?AUSE FI
L) SET _' RESET
Sdeding the Videe SignaJSeurce
Before your TV can begin memorizing the available channels, you
must specify the type of signal source that is connected to the TV
(i.e., an antenna or cable system).
Press the MENU button.
Press the • or • button to
select "Channel", then press
the ENTER button.
'O
Press the • or • button to
select "Air/CATV", then
press the ENTER button.
If you are connected to an
antenna, press the • or •
button to select "Air".
If you connected cable,
press the • or • button to
select the type of cable
system: "STD", "HRC" or
"IRC'.
Press the EXIT button to exit.
NOR
• "STD', "HRC" and "IRC" identify various types of cable TV
systems. Contact your local cable company to identi6z the lype
of cable system that exists in your particular area. At this point
the signal source has been selected. Proceed to "Storing
Channels in Memory".
• Subscription cable services require service-specific requirement
for viewing.
glish - 26