Con¿guring the Channel Menu
Air / Cable
Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a Cable system).
Press the TOOLS button to display the Tools menu. You can also set the Antenna by
Switch to Cable (or Switch to Air).
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna
When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC
identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels (Clear Scrambled Channels). The Auto
program menu then reappears.
If you want to stop Auto Programming, press the ENTERE button. The Stop Auto Program? message will be displayed.
Select Yes by pressing the
Clear Scrambled Channels (digital channels only)
This function is used to ¿lter out scrambled channels after Auto Program is completed. This process may take up to 20~30
To stop searching scrambled channels: Press the ENTERE button to select Stop. Press the
press the ENTERE button.
This function is only available in Cable mode.
For detailed procedures on using the Channel List, refer to the 'Managing Channels' instructions.
You can select these options by simply pressing the CH LIST button on the remote control.
Fine Tune (analog channels only)
Use ¿ne tuning to manually adjust a particular channel for optimal reception.
If you do not store the ¿ne-tuned channel in memory, adjustments are not saved.
* will appear next to the name of ¿ne-tuned channels.
To reset the ¿ne tuning setting, press the
Using this menu, you can add / delete or set favorite channels and use the program guide for
Shows all currently available channels.
Shows all added channels.
Shows all favorite channels.
To select the favorite channels you have set up, press the FAV.CH button on the remote control.
button, then press the ENTERE button.
button to select Reset, then press the ENTERE button.
English - 23
Clear Scrambled Channel
button to select Yes, then
TV #3 Alice's Adventures in Wonderland