Selecting An External Source - Samsung HL-P5085W Instruction Manual

SpeciaJ Features
Sdecting an E×temaJ Source
You can use PIP to view a signal from an external source, such as a VCR.
Press the MENU button.
Press the • or • button to
select "Picture", then press
the ENTER button.
Press the • or • button to
select "PIP", then press the
ENTER button.
Press the • or • button to
select "Source", then press
the ENTER button.
If you have not connected
any equipment to the TV's
input jacks, the signd from
these inputs will not appear.
Press the • or • button to
select an external signal,
then press the ENTER button.
Press the EXIT button to exit.
Mode :Standard I,
Coior%n_ iWarmi _,
Size : Wide I,
Digital NR : Off I,
DNle : On I,
My Color Control I,
Film Mode : Off I,
PIP
Mode : Standard I,
ColorTone :Warm1 I,
Size : Wide I,
Digital NR : Off I,
DNle : On I,
My Color Control I,
Film Mode : Off
PIP ....... _"
• The sub picture doesn't support "ANT 2 IN", "Component1 ", "Component2", "PC", "DVI" and
"HDMI" modes.
• For more information about external signals, see "Viewing an External Signal Source" (See
page 39). If you select "TV', the sub picture will be the same as the mare picture.
glish - 56