Changing The Channel Of The Sub Picture - Samsung HL-P5085W Instruction Manual

Special Features
Changing the (hannel d the SubPicture
After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels.
Press the MENU button.
Press the • or • button to
select "Picture", then press
the ENTER button.
Press the • or • button to
select "PIP", then press the
ENTER button.
.........Press the • or • button to
.............. select "Channel", then press
the ENTER button.
Press the • or • button to
select a channel you want,
then press the ENTER button.
Press the EXIT button to exit.
Mode : Standard I,
ColorTone :Warm1 I,
Size : Wide I,
Digital NR : Off I,
DNle : On I,
My Color Control I,
Film Mode : Off I.
PIP ....... _"
AJtemate method
Press the CHA or CHv button on the remote control to change
the sub picture channels while PIP is on.
NOTE
• The sub picture channels are not available when antenna is set to "ANT 2 IN". It finks to "ANT
1 IN".
glish - 60