Using The Photo List - Samsung LN46A750 User Manual

Using the WISELINK Pro Menu
1. Press the MENU button. Press the A or T button to select "Application",
then press the ENTER C_ button.
2. Press the A or T button to select "WISELINK Pro", then press the
ENTER _ button.
>- The "WISELINK Pro" menu is displayed.
Press the W.LINK button on the remote control to display the "WISELINK
Pro" menu.
Press the SOURCE button on the remote control repeatedly to select
"USB", then press the ENTER (Z_ button.
3, Press the Red button, then press the A or T button to select the
corresponding USB Memory Device (i.e. if connected through a hub). Press the ENTER CM button.
>- This function differs depending on the USB Memory Device connected to TV.
>- The selected USB device name appears at the bottom left of the screen.
4. Press the 41 or I_ button to select an icon (Photo, Music, Movie, Setup), then press the ENTER C:_ button.
>- To exit "WISELINK Pro" mode, press the W.LINK button on the remote control.
Using the Photo List
This menu shows Photo files saved on an USB memory device.
Photo List
1
2.
Press the W.LINK button on the remote control to display the "WISELINK
Pro" menu.
Press the 4 or 1_ button to select "Photo", then press the ENTER
button.
Photo files are displayed.
This menu only shows files whose file extension is jpg. Files of other
formats such as bmp or tiff will not be displayed.
Press the _ (Play) / ENTER CM button to start the Slide Show.
To move to the previous / next group, press the _ (REW) or
(FF) button.
When moving to a photo, loading may take a few seconds. At this
point, the loading icon will appear at the screen.
It may take some time to load photo files as Thumbnail images.