Samsung LN46A750 User Manual page 21

Storing Channels in Memory (Automatic Method)
1
1
Press the MENU button to display the menu.
Press the A or T button to select "Channel", then press the ENTER C:_
button.
Press the A or T button to select "Auto Program", then press the ENTER
button.
1
Press the A or T button to select the antenna connection, then press the
ENTER C_ button.
>- Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Auto: "Air" and "Cable" antenna signals.
1
When selecting the Cable TV system:
Press the ENTER _ button to start the auto program.
Press the A,T, _1 or _ to select the correct analog signal cable system
source among "STD", "HRC", and "IRC".
Press the A or T button to select "Start", then press the ENTER C_ button.
If you have Digital cable TV, select the cable system signal source for both
Analog and Digital.
>- STD, HRC and IRC identify various types of cable TV systems. Contact
your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
The TV begins memorizing all available stations.
>- After all the available channels are stored, it starts to remove scrambled
channels (see page 43). The Auto program menu then reappears.
>- If you want to stop Auto Programming, press the ENTER C;# button.
The "Stop Auto Program?" message will be displayed. Select "Yes" by
pressing the 4 or _ button, then press the ENTER C_ button.
Press the EXIT button to exit.