Setting up the TV with your PC
How to Auto Adjust
1.
Use the Auto "Adjust function" to have the TV set automatically
adjust the video
signals it receives. The function also automatically
fine-tunes the settings and
adjusts the frequency
values and positions.
This function does not work in DVI-Digital
mode.
Preset: Press the SOURCE
button to select PC mode.
Press the MENU button to display the menu.
Press the A or T button to select "Picture", then press the ENTER
button.
2.
Press the A or T button to select "Auto Adjustment",
then press the ENTER
C *_ button.
Press the EXIT button to exit.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the A or T button to select "Auto Adjustment",
then press the ENTER
C; ,-_ button.
Adjusting
the Screen Quality
The purpose of the picture quality adjustment
is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then make the vertical frequency
adjustments
on your PC and fine tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
Preset: Press the SOURCE
button to select PC mode.
1.
1
Press the MENU button to display the menu.
Press the A or T button to select "Picture", then press the ENTER
button.
Press the A or T button to select "Screen", then press the ENTER ©#
button.
1
Press the A or T button to select "Coarse" or "Fine", then press the ENTER
G# button. Press the 4 or I_ button to adjust the screen quality.
>_ Vertical stripes may appear or the picture may be blurry.
Press the ENTER C;# button.
Press the EXIT button to exit.