Network Connection - Wireless; Network Selection - Samsung LN46A750 User Manual

Series 750
Hide thumbs Also See for LN46A750:
Table of Contents

Advertisement

Network Connection - Wireless
You can connect to the Samsung's
Infolink network wirelessly
through a wireless
IP sharer.
The Modem Port
on the Wall
Wireless IP sharer
Modem Cable
TV Side Panel
Wireless LAN Adapter
for InfoLink
(((
lm
Connect the Samsung
Infolink Wireless adapter
into the Wiselink terminal
of the TV.
>-
You must use the Samsung Wireless
LAN Adapter for InfoLink(WIS-08BG)
to use a wireless network.
>_
The Samsung Wireless LAN Adapter for InfoLink is sold separately. Contact a Samsung
Electronics
agent or service
center for purchasing.
>_
To use a wireless network, your TV must be connected
to a wireless
IP sharer.
>-
If the wireless IP sharer supports
DHCP, you TV can use a DHCP or static IP address to connect to the wireless
network.
>-
You must use a wireless
IP sharer that supports
IEEE 802.11 B or IEEE 802.11G.
>_
If the wireless IP sharer allows you to turn on/off the Ping connection
function, turn it on.
>_
Set the wireless IP sharer to Infrastructure
mode. Ad-hoc mode is not supported.
>-
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless
IP sharer
is currently being used by another device nearby, this will result in interference
and communications
may fail.
>_
When applying the security key for the AP (wireless IP sharer), only the following
is supported.
- 1)Authentication
Mode : WEP, WPAPSK, WPA2PSK
- 2) Encryption
Type : WEP, TKIP, AES
If you apply a security system other than the systems listed above, it will not work with the TV.
Network selection
Select Cable or Wireless as the method to connect to the Samsung's
Infolink
network.
1.
Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER _
button.
2,
Press the A or T button to select "Network selection",
then press the
ENTER
C_ button.
m
Press the A or _r button to select "Cable" or "Wireless", then press the
ENTER C_ button.
' Cablei connect
tO Samsung's
lnfolink netw0rk Using a cable:
' Wireless:
Connect to Samsung S lnfolink network wirelesslYl
>- The menu is activated only if the Samsung Wireless
LAN Adapter for
InfoLink is connected.
(See page 107)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents