Network
Test
You can test or confirm the network connection
status after setting up the network.
1.
Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER C_ button.
2.
Press the A or T button to select "Wireless Network Setup", then press the
ENTER C_, button.
1
Press the A or T button to select "Network Test", then press the ENTER C_
button.
>- The current network settings will appear.
"_ If no "Access Point Select" is set up, the test cannot be completed.
(See
page 111)
Press the EXIT button to exit.