Recording - Samsung LN46A750 User Manual

Anynet + Menu
The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.
Device List Displays the Anynet ÷ device list.
Record Starts a recording. (This menu works only for a device supporting recording.)
Menu on Device Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder's title menu
.............................................................................................................................................................................................. appears: .........................................................................................................................................
Device Operation Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD
Recorder appears.
Allows reserving a recording. (This menu works only for a device supporting
recording reservations.)
Stops recording.
Sound is output through the receiver (home theater).
You can set the Anynet + (HDMI-CEC), auto turn off, and searching connections for
using Anynet +.
Timer Recording
Stop Recording
Receiver
Setup
TV Remote Control Buttons Available in Anynet + Mode
Anynet + Device
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
After switching to the device, while
playing a file
Numeric buttons
A/T/_/_/ENTER _ buttons
i Co_!°rbu!!°nos ! EX!T butt°n ..............................................................................................
(Backward search) / _ (Forward search)
(Stop) / [_ (Play)/[_ (Pause)
Device with built-in Tuner After switching to the device, when you
CH v / CH ^ button
watching
TV are
a
program
>_ TheAnynet ÷ function only works when the active source on the TV remote control is set to TV.
>- The _ button works only while in the recordable state.
>_ You cannot control Anynet ÷ devices using the buttons on the TV. You can control Anynet ÷ devices only using the TV
remote control.
>- The TV remote control may not work under certain conditions. In this case, reselect the Anynet + device.
>_ The Anynet ÷ functions do not operate with other manufacturers' products.
>_ The _, _ operations may differ depending on the device.
Recording
You can make a recording of a TV program using a Samsung recorder.
1. Press the TOOLS button.
2. Press the A or T button to select Recording Immediately and press the ENTER E_
button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the A or V' button to select a recording device and pressthe ENTER G_
button. Recording begins.
When the recording device is not displayed
Select "Device List" and press the red button to search devices.
Press the EXIT button to exit.
>_ You can record the source streams by selecting "Record" after pressing the TOOLS button.
>- Pressing the _ button will record whatever you are currently watching. If you are watching video from another
device, the video from the device is recorded.
>_ Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect
an antenna to a recording device, refer to the recording device's users manual.