Samsung LN46A750 User Manual page 55

1
The "V-Chip" screen will appear.
Press the A or T button to select "Change PIN", then press the ENTER c_
button. The Change PIN screen will appear. Choose any 4 digits for your
PIN and enter them. As soon as the 4 digits are entered, the "Confirm new
PIN." screen appears. Re-enter the same 4 digits. When the Confirm screen
disappears, your PIN has been memorized.
Press the EXIT button to exit.
>_ If you forget the PIN, press the remote-control buttons in the following
sequence, which resets the pin to 0-0-0-0 : Power Off. _ Mute _ 8 _ 2
4 --> Power On.
How to Enable/Disable the V-Chip
1. Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER C3_button.
2, Press the A or T button to select "V-Chip", then press the ENTER C#
button.
The message "Enter PIN" will appear. Enter your 4 digit PIN number.
1
The "V-Chip" screen will appear.
To enable the V-Chip feature, press the ENTER C_ button so that the "V-Chip
Lock" field is "On". (Pressing the A or T button will alternate between "On"
and "Off'.)
Press the ENTER C_ button.
Press the EXIT button to exit.