Cable Network Setup - Samsung LN46A750 User Manual

Cable Network Setup
"> First, the "Network selection" must be set to "Cable". (See page 107)
Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.
>- Please check if the LAN cable is connected. (See page 105)
1. Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER _ button.
2. Press the A or T button to select "Cable Network Setup", then press the
ENTER G -_ button.
1
4.
Press the ENTER C:_ button to select "lnternet Protocol Setup".
Press the A or T button to select "Auto Setup", then press the ENTER
button.
>- The Internet Protocol is set automatically.
>- Select "Network Test" to check the network connectivity.
(Refer to page 109)
Press the EXIT button to exit.
Manual Setup
To connect the TV to the LAN using a static IP address, you must set up the
Internet Protocol (IP).
>- Please check if the LAN cable is connected. (See page 106)
1. Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER _ button.
2. Press the A or T button to select "Cable Network Setup", then press the
ENTER C_ button.
3. Press the ENTER C3M button to select "lnternet Protocol Setup".
4. Press the A or T button to select "Manual Setup", then press the ENTER C_
button.
Press the ,i,, T, 4 or 1_ button to move to an item, and press the numeric
button to configure the selected item. Press the ENTER _ button.
>- Select "Network Test" to check the network connectivity.
(Refer to page 109)
Press the EXIT button to exit.