Table of Contents
Advertisement
Printer Memory Configuration
The printer features two slots which accept 32-, 64-, and 128-Mbyte SDRAM
DIMMs. All combinations except 32 Mbytes alone are allowed to a maximum of 256
Mbytes.
The Phaser 4400B reports 32 Mbytes of memory, even though it has a 64-Mbyte
DIMM installed. In order to get the full 64 Mbytes of memory to be reported as well
as activate other features, users must upgrade to the N-model with a Configuration
Upgrade Kit, part number 098S04703.
The Startup page and the Configuration pages list the amount of RAM installed in the
printer.
If the memory does not meet the following specifications, it is ignored by the printer.
PC133 DRAM Standard
I
144-Pin SODIMM
I
Serial Presence Detect
I
3.3 Volt
I
Monitoring Consumables
The status of printer consumables is available through the Supplies Info Menu.
Replaceable Items
Print Cartridge (rated at 5% image
coverage of letter-size paper)
Maintenance Kit (includes Fuser,
Transfer Roller, and nine rollers for Feed,
Retard, and Nudger Roller assemblies).
Repackaging Information
If the printer must be returned to Xerox and the customer has not saved the shipping
box and all internal packaging, a repackaging kit is available for order from the local
Customer Support Center.
Repackaging Kit: part number 065-0606-00
Phaser 4400 Laser Printer Service Manual
Print Life
High-Capacity
15,000
Toner wt. 620 g (1.36 lbs.)
Standard-Capacity 10,000
Toner wt. 420 g. (.9 lbs.)
up to 200,000
1-3
Advertisement
Table of Contents
