Auto-Bank To Selected Track; Display Track Numbers On Surface; Solo Mode; Wheel Sensitivity - Euphonix MC control User Manual

6.3.5

Auto-bank to selected track

Selecting a track in the application causes the MC Control to display the bank
containing that track. This keeps the selected track assigned to the surface.
6.3.6

Display track numbers on surface

The track number is included with the track name in the channel display.
6.3.7

Solo Mode

Not all applications support Solo mode. Those that support it behave as follows.
Solo in place
Mutes all tracks except solo track.
After-Fader Listen (AFL)
The Solo level is derived after fader level.
Pre-Fader Listen (PFL)
54
The Solo level is derived before fader level.
6.3.8

Wheel Sensitivity

The sensitivity of the Jog Wheel can be precisely adjusted using the sliders shown
in Figure 6-4. The top two sliders pertain to the MC Transport, the bottom is the
Jog Wheel for the MC Control.
The center position is the default for each control. Click and drag a slider to
move it right for faster response or left for a slower, more controlled movement.
Click the Reset button to restore the center position.
AUDIO | VIDEO MEDIA CONTROLLER