Fader Strips; Fader; Fader Strip - Euphonix MC control User Manual

AUDIO | VIDEO MEDIA CONTROLLER
4.3

Fader Strips

The MC Control provides four fader strips, each with a touch-sensitive fader,
that control tracks in an audio or video application.
4.3.1

Fader

The fader controls the track assigned to this strip. It is motorized, so it reflects
changes made in the application, such as automation. It is also touch sensitive,
which some applications use when automating.
When the Select by Touch General preference is set (see page 53), touching a fader
selects that track in the application and attentions it, just like pressing the Sel key.
Holding down the Shift key and touching a fader sets it to unity gain.
4.3.2 ON
The track is on (unmuted) when the strip's On key is lit and off (muted) when the
strip's On key is not lit.
SOLO
ON
12
6
0
5
10
20
30
40
60
Figure 4-2 Fader strip
29