Workstations; Workstations Tab - Euphonix MC control User Manual

AUDIO | VIDEO MEDIA CONTROLLER
6.2

Workstations

An Artist media controller can control applications running on a second comput-
er, referred to in this guide as a workstation. The Workstations tab establishes
the list of workstations that the WORKSTATION key cycles through. Any work-
station running EuCon software can be in this list, including those controlled by
the System 5-MC, MC Pro, and MC Control.
51
Figure 6-3 Workstations tab
All Workstations
All Workstations lists all EuCon-enabled workstations on the network. If the
workstation is already in the My Workstations list, it is shown in gray and cannot
be selected.
My Workstations
My Workstations lists the workstations that can be attached to by pressing the
WORKSTATION key.