Removing Screws From The Bottom Panel; Removing Connecting Part And Side Panel; Mc Mix And Mc Control Attached By Connecting At Side Panel - Euphonix MC control User Manual

AUDIO | VIDEO MEDIA CONTROLLER
To join an MC Control to an MC Mix:
1. On the MC Mix, use a #2 Phillips screwdriver to remove the two silver screws
(Figure 2-3).
The screws may be tight, so you may have to use some force.
2. Lift the black plastic connecting part and side panel up and out of the MC
Mix (Figure 2-4).
3. On the MC Control, remove the side panel (see Figure 2-2 left) on the end
where it will attach to the MC mix.
4. Slide the connecting part of the MC Control into MC Mix to attach them to-
gether (Figure 2-5).
Figure 2-5 MC Mix and MC Control attached by connecting at side panel
Figure 2-3 Removing screws from the bottom panel
Figure 2-4 Removing connecting part and side panel
17