Table of Contents
Advertisement
Select the Date, Time, or Title You Want to Record on Your Tape
The clock cell must be installed, and the date and time set before they can be selected
and recorded. When the SCENE SELECTAE dial is inAUTO, the auto date mode is
automatically selected.
I_TITITLE
I_ DISP.
TAYLOR
WAYNE
1. Attach a power supply and place
POWER
switch in CAMERA.
The
power indicator
will light.
2. Make sure the SCENE SELECTAE
dial is not set to AUTO.
3. Press MODE until DISPLAY appears
beside the F2 button in the display
panel.
_] DISP. appears in the
viewfinder.
4. Repeatedly
press ['2 to select the date,
time, or title you want to record.
• Date Display:
The date will be
displayed
and recorded.
• Auto Date:
The date will be
automatically
recorded
for
approximately
five seconds.
50
• Date/Time Display: The date and
time will be displayed and recorded.
• TV On-Screen
Display: The
viewfinder displays will appear on
the screen of a TV connected to the
camcorder during record pause. In
this mode the date will be displayed
and recorded.
Note: This mode is not available during
recording.
• Date Off: No date or time will be
displayed or recorded.
• Title Display: The title you created
will be displayed and recorded.
Note: If no title has been created,SET
CHAR appears and a title can be created.
Details
are on page 48.
Advertisement
Table of Contents
