Time Counter With Memory; Tape Time-Remaining Display - RCA CC618 User Manual

_:_:_:_:i'_'_'_'_i _',_ • =_i==iii!_iiiiiiii_iiiii_ii_ ,<_ _ _ i_iiiiii_iiiiii_ii_iii_i_iiiiiii_ _ _ _iiiiiiiiii!!i_iiiiii_iiii_iii_iii_i_iiiii_iii_,iii_ii_ii_i!i@!!i_
Tape Time-Remaining Display
The approximate time remaining on the tape in the camcorder is automatically
displayed in the viewfinder. The SP°SLP/T20°30°40 switch must be set for the correct
recording speed and tape length before the camcorder can correctly calculate time
remaining.
30MIN
29_IN
I
2MIN
(_hlng)
OMIN
(_hlng)
I
30MIN T30
TAPE END
Time Counter With
Memory Stop Turned On
SP.SLP/T20,30.40
Switch
Set the Recording Speed and Tape
Length
Before recording, repeatedly press the
SP°SLP/T20o30o40 switch to select the
recording speed and length of tape you
are using.
• Select T20 SP if you are using a tape
with 20 minutes or less recording time
and want to record in SP speed.
• Select T20 SLP if you are using a tape
with 20 minutes or less recording time
and want to record in SLP speed.
° Select T30 SP if you are using a tape
with 30 minutes recording time and
want to record in SP speed.
• Select I"30 SLP if you arc using a tapc
with 30 minutes recording time and
want to record in SLP speed.
• Select T40 SP if you are using a tape
with 40 minutes recording time and
want to record in SP speed.
° Select T40 SLP if you are using a tape
with 40 minutes recording time and
want to record in SLP speed.
Notes: The time-remaining indicator will
start flashing when the remaining tape time
reaches two minutes.
TAPE END appears when the tape reaches its
end during recording or a cassette is loaded
with its tape already at its end.
33