Cannot Install The Printer Driver - Canon BJC 6100 - Color Inkjet Printer User Manual

Troubleshooting

Cannot install the printer driver

Cause:
Installation was interrupted.
Solution:
When you connect to the USB interface running under Windows 98, check the USB driver settings and delete
the unnecessary USB driver (if applicable). For details, refer to the "Additional Notes on Handling the USB
Interface" manual provided with the printer.
Refer to the Getting Started manual and install the printer driver using the correct procedure. If you are rein-
stalling the printer driver, remove the previously installed BJ printer driver and then install the printer driver
again.
Uninstalling the printer driver
Select Programs and then BJ Printer from the Windows Start menu and click Uninstall. Then follow the on-
screen instructions.
Note
If an error occurred and you forcibly shut down the installer, you may not be able to install the printer driver
because Windows is no longer stable. Restart Windows and then reinstall the printer driver.
Load the Setup Software & Reference Guide CD-ROM. When the CD-ROM folder opens, double-click the BJ
Installer icon and then select your printer. Click the Custom Remove tab.
Then follow the on-screen instructions.
Cause:
Other application programs are running.
Solution:
Quit all other application programs and start the installation again.
Cause:
The CD-ROM drive used for the installation is not specified correctly.
Solution:
Double-click on the My Computer icon and then double-click on the CD-ROM icon in the My Computer win-
dow. Refer to Getting Started and proceed with the installation.
Double-click on the CD-ROM icon. Refer to Getting Started and proceed with the installation.
Cause:
There is a problem with the CD-ROM.
Solution:
Check that Windows Explorer can successfully read the disk.
If the CD-ROM is unreadable, contact a Canon service facility.
Check that the CD-ROM icon is displayed on the screen.
If the CD-ROM is unreadable, contact a Canon service facility.
59