Canon BJC 6100 - Color Inkjet Printer User Manual page 38

The following two pages describe the basic procedures from scanning to printing.
1
Install the IS Scan scanner driver.
Installing the IS Scan Software (p.40)
2
Install the Color Image Scanner Cartridge IS-32.
Remove the BJ Cartridge installed on the left side of the cartridge
holder and then install the Color Image Scanner Cartridge IS-32.
3
Launch a graphics application program.
Launch a graphics application program as follows.
- If you use a TWAIN-compliant graphics application program, launch the TWAIN-compliant appli-
cation program. Then launch IS Scan from within the application program.
- If you use IS Scan Plus, select Programs from the Start menu first. Point to IS Scan Plus and
then select IS Scan Plus.
- If you use a TWAIN-compliant graphics application program, launch the TWAIN-compliant appli-
cation program first. Then launch IS Scan from within the application program.
- If you use IS Scan as a stand-alone application program, double-click IS Scan BJC-6100 in the
folder you specified during the installation procedure.
Perform white level calibration.
Load the white calibration sheet in the auto sheet feeder and click White Level.
38