Canon BJC 6100 - Color Inkjet Printer User Manual page 31

3
Remove the new ink tank from its package. Pull the
orange tape up and against the perforations to open
the packing film.
Important
Remove the film carefully so you do not
remove the label from the ink tank. The
label is needed to match the ink tank with
the correct slot of the BJ Cartridge.
4
Grip the bottom of the ink tank as shown in the figure
and twist off the orange protective cap in the direction
of the arrow
Important
Never attempt to reattach a protective cap to an ink tank.
•
Discard the protective cap according to the local laws and regu-
lations regarding disposal of consumables.
To avoid interfering with the ink supply from a tank, do not touch
•
an open ink port on the ink tank.
5
Hold the new ink tank at a slight angle, align it with the
correct slot, then press down gently on top of the ink
tank until it locks in place.
Make sure that you insert the ink tank in the correct slot. The fol-
lowing figures show the correct array of ink tanks in the BJ
Cartridges.
Standard colour combination
Black BJ Cartridge BC-30
Centre : BCI-3BK (Black)
Color BJ Cartridge BC-31
Left
Centre : BCI-3M (Magenta)
Right
: BCI-3C (Cyan)
: BCI-3Y (Yellow)
Replacing the Ink Tanks
Label
Ink Tank
BCI-3BK
Ink Tank Ink Tank Ink Tank
BCI-3C BCI-3M BCI-3Y
Black
Cyan Magenta Yellow
31