Loading Paper (A4 Size); Using Plain Paper - Canon BJC 6100 - Color Inkjet Printer User Manual

Loading Paper (A4 size)

This section describes the paper loading procedure using A4-size plain paper.

Using Plain Paper

1
Raise the paper rest, and pull out the paper output
tray and extension.
2
Fan the stack to remove static cling and align
the edges of the stack by tapping it on a flat
surface. (Loading the paper without first fan-
ning and aligning the edges could cause
paper jams.)
Important
To avoid touching the print surface, always handle media by the edges. Unclean or scratched
print surfaces can adversely affect print quality.
3
Load the stack of paper as follows.
Align the stack with the right side of the auto sheet
feeder and insert it into the auto sheet feeder.
(You can print on either side of plain paper.)
Slide the paper guide to the left side of the stack
until it is snug.
Note
Make sure that the top of the stack is not higher than the
load limit mark. Maximum load capacity for plain paper is
approximately 130 sheets (64 g/m
4
Make sure that the paper thickness lever is set to the Up position.
20
Paper guide
2
).
Paper rest
Paper output tray and extension
Load limit mark
Print side