Channel Selection In Osd - D-Link KVM-440 Product Manual

Section 3 - Operation
Channel.Select.to.Computer
Use the <UP> and <DOWN> arrow keys to move the highlighted bar to a computer and then press<ENTER> to select it and
exit the OSD menu. A banner with the channel name will be shown on the left-upper corner of the screen.
Channel.Select.to.Cascade.Port
A plus mark (+) showing to the left side of the channel name indicates that the port is cascaded. Move the highlighted bar to
this channel and then press <Enter>. The screen will display a list of the computers connected to the slave KVM.
Return.from.Cascade.Port
Pressing <R> will return to the upper layer OSD menu.
D-Link KVM-440/450 User Manual
Channel.Selection.in.OSD
Figure.17.-.Channel.Banner.(Single.Layer)
Figure.18.-.Channel.Banner.(Cascade.Layer)
Channel Name
Channel Number
Channel Name
Channel Number
2 nd Layer Channel Number
1 Layer Channel Number
st
31