Section 3 - Operation
There are two auto-scan modes, please refer to the Setup.in.OSD.–.Scan.Mode section to set up the auto-scan mode.
• Scan all computers.
• Scan any computers which are marked for auto-scan.
The auto-scan time interval can be adjusted by pressing <F1> from the OSD.main.menu. Please refer to the Setup.in.OSD.–.Scan.
Time.section.
Note: You can also enter or exit the auto-scan mode by pressing <F2> from the OSD main menu. Please refer to the Auto-Scan in OSD
section.
D-Link KVM-440/450 User Manual
Auto-scan.Mode.Options
Auto-scan.Time.Interval
26