Show Statistics Access-List Interface - Brocade Communications Systems Brocade 6505 Command Reference Manual

2

show statistics access-list interface

show statistics access-list interface
Shows active ACL rules in the switch and if the rules have counters enabled.
Synopsis show statistics access-list interface [port-channel number | tengigabitethernet slot/port | vlan
vlan_id]
Operands
Defaults None
Command Privileged EXEC mode
Modes
EXEC mode
Description Use this command to display the active rules on the switch and whether those rules have counters
enabled.
Usage None
Guidelines
Examples To display the statistics for ACL applied on two interfaces, a 10 Gbps Ethernet interface and VLAN
100:
See Also show
218
port-channel number
Specifies the port-channel number. The range of valid values is from 1
through 63.
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
vlan vlan_id Specifies the VLAN number. The range of valid values is from 1 through 3583.
switch#show statistics access-list interface tengigabitethernet 0/1
switch#show statistics access-list interface vlan 100
running-config, show statistics access-list mac
Converged Enhanced Ethernet Command Reference
53-1002508-01