Related Manuals for Elo TouchSystems 0700L
Summary of Contents for Elo TouchSystems 0700L
- Page 1 User Manual Elo TouchSystems 0700L Touchmonitor User Manual – 0700L SW601504 Rev B Page 1 of 20...
- Page 2 Copyright © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Tyco Electronics.
-
Page 3: Table Of Contents
Table of Contents Chapter 1 - Introduction ................4 Chapter 2 – Installation ................5 Chapter 3 – Mounting ................12 Chapter 4 – Operation ................13 Chapter 5 – Technical Support ............... 17 Chapter 6 – Safety & Maintenance ............ -
Page 4: Chapter 1 - Introduction
Chapter 1 - Introduction Product Description Your new touchmonitor combines the reliable performance of Elo TouchSystems touch products with the latest developments in touch technology and display design. This combination of features creates a natural flow of information between a user and the touchmonitor. This touchmonitor incorporates a 24-bit color, active matrix thin-film-transistor LCD panel to provide high quality display performance. -
Page 5: Chapter 2 -Installation
Chapter 2 –Installation Unpacking the Touchmonitor Open the carton and verify that the following items are present: Touchmonitor with protective sheet for its face Elo TouchTools CD & User Manuals CD Quick Install Guide USB Y-cable (“Data Cable”: Power and USB signal, “Aux Power Cable”: additional Power) ... - Page 6 Touchmonitor Connections 1. Connect the mini-B plug of the provided USB Y cable to the mini-USB port on the monitor, and connect the “Data Cable” connector of the provided USB Y cable into one of your computer’s USB ports. NOTE: Some computers may not provide enough power to the monitor from one USB port.
- Page 7 Insert the Elo TouchTools CD into your computer’s CD-ROM drive. The CD should automatically run the Elo TouchTools application. Select “Touchmonitor Peripherals”: Select the “USB Display” folder, and then select the “Drivers” folder. Double click on the .exe file. Select your language and click “I Accept” when the end user license agreement window appears: User Manual –...
- Page 8 The following screen appears during install: No message will be shown at the end of the install. Reboot your computer after the install is complete. After the monitor is plugged in via USB cable, the monitor shape icon will appear in the system tray and the following message will be displayed: User Manual –...
- Page 9 Installing the Touch Technology Software Drivers Some software installation is required for your touchmonitor to work with your computer. The drivers for the Windows 7, XP, Vista, WePOS, and 32-bit Server 2003 and 2008 operating systems are provided with your touchmonitor on a CD. Visit www.elotouch.com for: ...
- Page 10 For Windows XP, Vista, Server 2003, Server 2008, and WEPOS installations, install the “USB Touchscreen Drivers” when prompted: For Windows 7 installations, check the “Install driver” box under “Elo USB Interfaces – Other Touchscreens” After accepting the end-user license agreement, the drivers will finish installing. Reboot your computer after the install is complete.
-
Page 11: Chapter 3 - Mounting
Chapter 3 – Mounting Rear VESA Mount A four-hole 75x75mm mounting pattern for M4 screws is provided on the rear of the monitor. The VESA FDMI-compliant counting is coded: VESA MIS-B, 75, C 75mm 75mm User Manual – 0700L SW601504 Rev B Page 11 of 20... -
Page 12: Chapter 4 - Operation
hapter 4 – Operation ower To turn the touchmonito r on or off, press the touchmonitor power button on the back of the itor once. system consumes low power when in SLEEP and OFF modes. Fo r detailed power onsumption specifications, refer to technical specifications on the website http://www.elotouch.com Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the mouse or pressing a keyboard key). - Page 13 In Extend Mode (default), the 0700L touchmonitor acts as an extension of the primary displa desktop. The resolutions of t he 0700L touchmonitor and the primary display are maintained. In Mirror mode, the same video resolution, color depth and refresh rate are sent to both displays. The video resolution that is sent depends on the primary display’s native resolution.
-
Page 14: Chapter 5 - Technical Support
Chapter 5 – Technical Support If you are experiencing trouble with your touchmonitor, refer to the following suggestions. If the problem persists, please contact your local dealer or contact TE Touch Solutions Customer Service. Solutions to Common Problems Problem Suggested Troubleshooting Check that the USB cable is correctly attached to the The touchmonitor does not respond when monitor and the computer. -
Page 15: Chapter 6 - Safety & Maintenance
Chapter 6 - Safety & Maintenance Safety To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor. They are not user-serviceable. The slots located on the sides and top of the touchmonitor case are for ventilation. Do not block or insert anything inside the ventilation slots. -
Page 16: Chapter 7 - Regulatory Information
hapter 7 – Regulatory Information I. Electrical Safety Information: Compliance is required with respect to the voltage, frequency, and current requirements icated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation, damage to the equipment or pose a fire hazard if the itations are not followed. - Page 17 ii) Reposition (turn) the digital device with respect to the affected receiver. iii) Reorient the affected receiver’s antenna. iv) Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits. v) Disconnect and remove any I/O cables that the digital device does not use.(Unterminat ed I/O cables are a potential source of high RF emission levels.)
- Page 18 Explan ation of Markings (1). In accordance with the SJ/T11364-2006 require ment, the electronic information products are marke d with the following pollution control logo. The Environment-Friendly Use Period for this product is 1 0 years. The product will not leak or mutate under normal operating conditions listed below, so that the use of this electronic information product will not result in any severe environmental pollution, any ily injury, or damage to any assets.
- Page 19 Chapter 8 – Warranty Informatio Except as otherwise stated herein, or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the TouchMonitors, Computer Module, and their components is 3 (three) years. Seller makes no warranty regarding the model life of components.
-
Page 20: Product Information
Press releases Software drivers TouchMonitor Newsletter Getting in Touch with us To find out more about the extensive range of Elo touch solutions, visit our website at www.elotouch.com, or simply call the ffice nearest you: North America Germany...