Setting The Water Softener - Zanussi ZSF 6161 User Manual

Water hardness
Clarke
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
The water softener must be set in both ways:
manually, using the water hardness dial and
electronically.
Setting the water softener manually (see table)

Setting the water softener

electronically (see table)
The water softener is factory set at position 5.
1. Press the On/Off button. The dishwasher
must be in setting mode.
°TH mmol/l
91 - 125 9,0- 12,5
76 - 90 7,6 - 8,9
65 - 75 6,5 - 7,5
51 - 64 5,1 - 6,4
40 - 50 4,0 - 5,0
33 - 39 3,3 - 3,9
26 - 32 2,6 - 3,2
19 - 25 1,9 - 2,5
7 - 18 0,7 - 1,8
< 7 < 0,7
Set switch to position 1 or
2
Adjusting the water hardness
setting
manually electronically
2 level 10
2
2
2
2
2
1
1
1
1
The water softener is factory set at position 2.
2. Simultaneously press and hold function
buttons B and C, until the lights of function
buttons A, B and C start flashing.
3. Press function button A, the lights of func-
tion buttons B and C turn off while the light
of function button A goes on flashing. In the
digital display is visible the current level.
Use of salt
yes
level 9 yes
level 8 yes
level 7 yes
level 6 yes
level 5 yes
level 4 yes
level 3 yes
level 2 yes
level 1 no
11