Zanussi ZSFN131W1 User Manual
  1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Dishwasher
  5. ZSFN131W1
  6. User manual

Zanussi ZSFN131W1 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
GETTING
STARTED?
EASY.
ZSFN131W1
EN User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZSFN131W1

Summary of Contents for Zanussi ZSFN131W1

  • Page 1 User Manual GETTING STARTED? EASY. ZSFN131W1 EN User Manual Dishwasher...

  • Page 2: Safety Information

    VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage.

  • Page 3: Safety Instructions

    Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be • between 0.5 (0.05) / 8 (0.8) bar (MPa) Follow the maximum number of 10 place settings. • If the supply cord is damaged, it must be replaced by the •...

  • Page 4: Water Connection

    WATER CONNECTION status of the appliance. They are not intended to be used in other applications and are not • Do not cause damage to the water hoses. suitable for household room illumination. • Before connection to new pipes, pipes not used •...
  • Page 5 Worktop Rinse aid dispenser Upper spray arms Detergent dispenser Lower spray arm Lower basket Filters Upper basket Rating plate Cutlery drawer Salt container Air vent...

  • Page 6: Control Panel

    CONTROL PANEL On/off indicator Start button Programme marker Programme knob Indicators Delay button INDICATORS Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Salt indicator. It is on when the salt container needs refilling. It is always off while the programme operates.

  • Page 7: Consumption Values

    Programme Type of load Degree of soil Programme phases • Crockery • Normal • Prewash • Cutlery • Lightly dried-on • Wash 50 °C • Pots • Intermediate rinse • Pans • Final rinse 60 °C • Drying • AirDry •...

  • Page 8: Information For Test Institutes

    Water Energy Duration 1) 2) Programme (kWh) (min) 3.1 - 3.8 0.012 - 0.014 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quan- tity of dishes and the degree of soil can change the values. 2) The values for programmes other than ECO are indicative only.
  • Page 9 German degrees French degrees Clarke de- mmol/l Water softener level (°dH) (°fH) grees 37 - 42 65 - 75 6.5 - 7.5 46 - 52 29 - 36 51 - 64 5.1 - 6.4 36 - 45 23 - 28 40 - 50 4.0 - 5.0 28 - 35...

  • Page 10: The Rinse Aid Empty Notification

    Make sure that the programme marker on the knob All the consumption values mentioned is set to the on/off position. in this section are determined in 1. To enter the user mode, press and hold . At accordance with the currently the same time turn the knob counterclockwise applicable standard in laboratory until the programme marker indicates the first...

  • Page 11: Before First Use

    automatically during the drying phase and remains CAUTION! If children have access to ajar. the appliance, we advise to deactivate AirDry. The automatic opening of the door may pose a danger. How to deactivate AirDry The appliance must be in programme selection mode.

  • Page 12: How To Fill The Rinse Aid Dispenser

    HOW TO FILL THE RINSE AID DISPENSER 4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container. CAUTION! The compartment (C) is for rinse aid only. Do not fill it with detergent.

  • Page 13: Setting And Starting A Programme

    2. Put the detergent in the compartment (A). You Make sure that there is detergent in the detergent can use detergent in tablets, powder or gel. dispenser before you start a new programme. 3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of Cancelling the delay start while the the appliance door.

  • Page 14: Hints And Tips

    HINTS AND TIPS GENERAL • Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on Follow the hints below to ensure optimal cleaning the tableware, we recommend that you use and drying results in daily use and to protect the tablets with long programmes.

  • Page 15: Before Starting A Programme

    BEFORE STARTING A PROGRAMME • The correct quantity of detergent is used. Before you start the selected programme, make UNLOADING THE BASKETS sure that: 1. Let the tableware cool down before you • The filters are clean and correctly installed. remove it from the appliance.

  • Page 16: Cleaning The Lower Spray Arm

    6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides. 3. To install the spray arm back, press it downwards. 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks.

  • Page 17: Troubleshooting

    EXTERNAL CLEANING • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. INTERNAL CLEANING • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth.
  • Page 18 With some problems, the dedicated indicator flashes intermittently to indicate a malfunction and the alarm code. Problem and alarm code Possible cause and solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket.
  • Page 19 Problem and alarm code Possible cause and solution The temperature of the water inside the • Make sure that the temperature of the inlet water appliance is too high or malfunction of the does not exceed 60°C. temperature sensor occurred. •...

  • Page 20: The Washing And Drying Results Are Not Satisfactory

    Refer to "Before first use", "Daily WARNING! We do not recommend use", or "Hints and tips" for other using the appliance until the problem possible causes. has been completely fixed. Unplug the appliance and do not plug it in again Once you have checked the appliance, press the until you are certain that it operates start button.

  • Page 21: Technical Information

    Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close together. There are residues of detergent •...

  • Page 22: Environmental Concerns

    Left-on mode (W) Power consumption Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. 3) In accordance with the 1059/2010 regulation.
  • Page 24 WWW.ZANUSSI.COM/SHOP...

Table of Contents