Use Of The Appliance; Setting The Water Softener - Zanussi ZSF2430 User Manual

Use of the appliance

Refer to the following instructions for each step of proce-
dure:
1. Make a check if the water softener level is correct for
the water hardness in your area. If necessary set the
water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the dishwasher.

Setting the water softener

The water softener removes minerals and salts from the
water supply. Minerals and salts can have bad effect on
the operation of the appliance.
Water hardness is measured in equivalent scales:
• German degrees (dH°).
• French degrees (°TH).
°dH
>24
22- 24
20- 22
18- 20
16- 18
13- 16
10- 13
7- 10
4- 7
< 4
1) No use of salt required.
Electronic adjustment
The water softener is set at the factory at level 5.
1. Press and hold the start/cancel button. Turn the pro-
gramme knob clockwise until the programme marker
agrees with the first washing programme on the con-
trol panel.
Water hardness
mmol/l
>4.2
3,9- 4,2
3,5- 3,9
3,2- 3,5
2,8- 3,2
2,3- 2,8
1,8- 2,3
1,2- 1,8
0.7- 1,2
< 0.7
5. Set the correct washing programme for the type of
load and soil.
6. Fill the detergent dispenser with the correct quantity
of detergent.
7. Start the washing programme.
If you use detergent tablets, refer to the chapter 'Use
of detergent'.
• mmol/l (millimol per litre - international unit for the
hardness of water).
• Clarke.
Adjust the water softener to the water hardness in your
area. If necessary, contact your local water authority.
°TH Clarke
>40
39- 40 27- 29
35- 39 25- 27
32- 35 23- 25
28- 32 20- 23
23- 28
18- 23 13- 17
12- 18
7- 12
< 7
2. Release the start/cancel button when the on/off indi-
cator light and the start/cancel indicator light start to
flash.
– At the same time, the end indicator light flashes to
show the level of the water softener.
Example:
5 flashes, pause, 5 flashes, pause, etc... = level 5
3. Press the start/cancel button one time to increase the
water softener level by one step.
Water hardness setting
> 29
17-20
9- 13
5- 9
< 5
10
9
8
7
6
5
4
3
2
1)
1
5