Table of Contents
Advertisement
Problem
Spinning starts late or the machine
does not spin:
The machine makes an unusual
noise:
No water is visible in the drum:
If you are unable to identify or solve the problem, con-
tact our service centre. Before telephoning, make a note
of the model, serial number and purchase date of your
machine: the Service Centre will require this information.
Technical data
Dimensions
Electrical connection
Voltage - Overall power - Fuse
Water supply pressure
Maximum Load
Spin Speed
The electronic unbalance detection device has cut in because the laundry is
not evenly distributed in the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several times before the unbalance
disappears and normal spinning can resume. If, after 10 minutes, the laun-
dry is still not evenly distributed in the drum, the machine will not spin. In
this case, redistribute the load manually and select the spin programme.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manually and then select the spin-
ning programme.
The machine is fitted with a type of motor which makes an unusual noise
compared with other traditional motors. This new motor ensures a softer
start and more even distribution of the laundry in the drum when spinning,
as well as increased stability of the machine.
Machines based on modern technology operate very economically using
very little water without affecting performance.
Width
Height
Depth
Information on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
Minimum
Maximum
Cotton
Maximum
Possible cause/Solution
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
60 cm
85 cm
63 cm
0,05 MPa
0,8 MPa
6 kg
1600 rpm
19
Hide quick links:
Advertisement
Table of Contents
