Table of Contents
Advertisement
Important! If you turn the programme selector dial to
another programme when the machine is working, the
red pilot light of button 7 will blink 3 times and the
Err
message
is displayed to indicate a wrong selection.
The machine will not perform the new selected
programme.
Select the spin speed by pressing button 2
When selecting a programme, the appliance proposes
automatically the maximum spin speed provided for
that programme. (See "Washing programmes" for the
maximum allowed spin speed).
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a different speed.
The relevant pilot light illuminates.
Select the available options by means of buttons
3, 4, 5 and 6
Depending on the programme, different options can be
combined. These must be selected after choosing the de-
sired programme and before starting the programme.
When these buttons are pressed, the corresponding pi-
lot lights illuminate. When they are pressed again, the
pilot lights go out. If an incorrect option is selected, the
integrated red pilot light of the button 7 flashes 3 times
Err
and the message
is displayed.
For the compatibility among the washing programmes
and the options see chapter «Washing programmes» .
Start the programme by pressing button 7
To start the selected programme, press this button; the
corresponding green pilot light stops blinking.
The pilot light 9 illuminates to indicate that the appli-
ance starts operating and the door is locked.
If you have chosen a delayed start, the machine will be-
gin the countdown.
Important! If an incorrect option is selected, the
Err
message
is displayed for a few seconds and the red
pilot light of this button blinks 3 times.
Select the Delay Start by pressing button 8
Before you start the programme, if you wish to delay the
start, press this button to select the desired delay.
The selected delay time value will appear on the display
for a few seconds, then the duration of the programme
will appear again.
You must select this option after you have set the pro-
gramme and before you start the programme.
8
You can cancel or modify the delay time at any moment,
before you press button 7 .
Selecting the delay start :
1. Select the programme and the required options.
2. Select the delay start by pressing button 8 .
3. Press button 7 :
- the machine starts its hourly countdown.
- the programme will start after the selected delay
has expired.
Cancelling the Delay Start after having started the pro-
gramme:
1. Set the washing machine to PAUSE by pressing but-
ton 7 .
2. Press button 8 once. On the display will appear
3. Press button 7 again to start the programme.
Important!
• The selected delay can be changed only after select-
ing the washing programme again.
• The door will be locked throughout the delay time. If
you need to open the door, you must first set the wash-
ing machine to PAUSE by pressing button 7 and wait
a few minutes before opening the door. After you
have closed the door, press the same button again.
Important! The Delay Start cannot be selected with the
draining programme.
Altering an option or a running programme
It is possible to change some options before the pro-
gramme carries them out.
Before you make any change, you must pause the wash-
ing machine by pressing button 7 .
Changing a running programme is possible only by re-
setting it. Turn the programme selector dial to
then to the new programme position. Start the new pro-
gramme by pressing button 7 again.
The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 7 to interrupt a programme which is
running, the corresponding pilot light starts blinking.
Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to
which is running. Now you can select a new programme.
and
to cancel a programme
' .
Hide quick links:
Advertisement
Table of Contents
