Table of Contents
Advertisement
A
B
Mod. xxxxxxxxx
Prod.No.
910000000 00
C
000V ~ 00Hz 0000 W
D
TECHNICAL DATA
Dimension
Electrical connection
Level of protection against ingress of solid particles and moisture
ensured by the protective cover, except where the low voltage
equipment has no protection against moisture
Water supply pressure
1)
2)
Water supply
Maximum Load
Spin Speed
1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do-
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
2) Connect the water inlet hose to a water tap with a 3/4'' thread.
INSTALLATION
WARNING! Refer to Safety chapters.
UNPACKING
1. Open the door. Remove all the items from the
drum.
6
00A
00000000
Width/ Height/ Total depth
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
Cotton
Maximum spin speed
The rating plate reports the model name (A) , product
number (B), electrical ratings (C) and serial number (D).
Accessories delivered with the
appliance may vary depending on
the model.
2. Put the packaging element on the floor behind
the appliance and carefully put it down onto its
rear side. Remove the polystyrene protection
from the bottom.
59,7 cm /84,7 cm /65,8 cm
230-240 V
2200 W
13 A
50 Hz
IPX4
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Cold water
9 kg
1351 rpm
1
2
Advertisement
Table of Contents
